Book123

    Free register and download UseNet downloader, then you can FREE Download from UseNet.

    Download without Limit " Science/Engineering Practical metrology " from UseNet for FREE!

More

K. J Hume, "Practical metrology"

TABLE OF CONTENTS:

I. APPARATUS

II. METHODS

Experiments

1. TO MEASURE A DOUBLE-ENDED PLAIN PLUG GAUGE

2. TO MEASURE A GAP GAUGE WITH SLIP GAUGES

3. TO MEASURE THE HEIGHT OF A CIRCULAR SPIGOT

4. TO MEASURE A FLUSH-PIN DEPTH GAUGE

5. TO CALIBRATE A MICROMETER

6. TO MEASURE A PLAIN RING GAUGE

7. TO MEASURE A TAPER PLUG GAUGE

8. TO MEASURE A TAPER RING GAUGE (LARGE DIAMETER) .

9. TO MEASURE A TAPER RING GAUGE WITH BALLS AND DEPTH GAUGE

10. TO MEASURE A PLUG SCREW GAUGE

11. TO CHECK A STRAIGHT EDGE

12. To CHECK AN ENGlNE;;tS SQUARE

13. To MEASURE A PLUG GAUdE ON A COMPARATOR

14. To MEASURE THE ANGLE OF A TAPER PLUG GAUGE WITH A SINE BAR

15. To CHECK A FORM GAUGE BY PROJECTION, INCLUDING THE CONSTRUCTION OF THE PROJECTION DRAWING

16. To MEASURE THE RADIUS AND ACCURACY OF A PLATE GAUGE OF LARGE RADIUS

17. To CHECK A SINE BAR

18. THE MEASUREMENT OF A SPUR GEAR TO DETERMINE ITS BASE CIRCLE DIAMETER AND TOOTH THICKNESS AT A GIVEN PITCH CIRCLE DIAMETER

19. To MEASURE THE SIMPLE EFFECTIVE DIAMETER OF A PLUG SCREW GAUGE USING A FLOATING MICROMETER

MEASURING MACHINE

20. To MEASURE THE PITCH ERROR OF A SCREW GAUGE (PLUG OR RING)

21. To MEASURE THE FORM AND ANGLE OF A PLUG SCREW GAUGE BY OPTICAL METHODS

22. To MEASURE THE MINOR DIAMETER OF A PLUG SCREW GAUGE USING A FLOATING MICROMETER MEASURING

MACHINE

23. To MEASURE THE MAJOR, MINOR AND EFFECTIVE DIAMETERS OF A RING SCREW GAUGE OPTICALLY BY MEANS

OF A CAST

24. To TAKE A CAST OF A SMALL RING SCREW GAUGE OR SIMILAR SHAPE

25. To MEASURE THE EFFECTIVE DIAMETER OF A RING SCREW GAUGE USING A HORIZONTAL COMPARATOR OR

MEASURING MACHINE

26. To SET AND CALIBRATE AN ENGINEER'S BLOCK LEVEL

27. To COMPARE THE LENGTHS OF Two END GAUGES ON AN N.P.L. TYPE LEVEL COMPARATOR

28. To MEASURE THE INCLUDED ANGLE OF A TAPER PLUG GAUGE USING AN AUTO-COLLIMATOR

29. To TEST A STRAIGHTEDGE USING AN AUTO-COLLIMATOR

30. To CALIBRATE A DIAL GAUGE

31. To MEASURE AN ANGULAR PLATE GAUGE USING AN OPTICAL DIVIDING HEAD

32. To CALIBRATE A DIVIDING HEAD OR TABLE USING ANGLE GAUGES AND AN AUTO-COLLIMATOR

33. To CALIBRATE A DIVIDED CIRCLE USING Two MICROSCOPES

34. To COMPARE Two SLIP GAUGES USING AN OPTICAL FLAT

35. To TEST THE FLATNESS OF A SURFACE PLATE USING A BLOCK LEVEL.

36. To CHECK THE INVOLUTE PROFILE OF A SPUR GEAR USING A DIVIDING HEAD

37. To CALIBRATE A PRECISION POLYGON (FIRST METHOD)

38. To CALIBRATE A PRECISION POLYGON (SECOND METHOD)

39. To CALIBRATE A PRECISION POLYGON (THIRD ME~HOD) .

40. To INVESTIGATE THE MEASUREMENT OF LOBED CYLINDERS

41. TESTS ON A VERTICAL COMPARATOR

42. TESTS ON A SCREW DIAMETER MEASURING MACHINE

43. To MEASURE SLIP GAUGES ON AN N.P.L. TYPE GAUGE INTERFEROMETER.

Buy Book at Lowest Price on Amazon

Download

Rating:
2.5 out of 5 by Book123