This assembly allows us to use all known at the time of distribution methods and unlock:1. With RedSn0w 0.9.6 beta 5;
2. C using Pwnage Tool Unlock Edition, with the possibility of independent creation of custom firmware.
The structure includes:
* PwnageTool 4.1.3 Unlock Edition;
* RedSn0w 0.9.6 beta 5;
* IOS 4.2.1 for all devaysov besides Apple TV;
* IOS 3.2.2 for iPad (needed for the version with PwnageTool).
Note that the unlock using this software can only be done on the iPhone 3G \ GS. 3GS is only compatible with the new bootrom (old Butrim with iOS 4.2 is not supported yet). Owners of the iPhone 4, 3GS (with a new bootrom), iPod touch 4G/3G/2G and iPad can do until just tied Jail. ie every time you shutdown or restart devaysa will turn it into a "jailbreak" by using the "Just boot tethered left now" in the utility RedSn0w.
To see the old you Butrim or not:
So, first of all, the device needs to be translated into DFU mode to do this:
Hold the button "Power" (in the upper left corner) for 2 sec.
Without releasing the "Power", click the button "Home" (bottom middle) for another 10 seconds.
Hold down the "Home", release the button "Power" and hold 15 seconds.
Then run the program iDetector and click the big button "Is My Bootrom Old or New?" and see the information we need. Once we know the truth, you must restart the phone while holding down the "Power" "Home". Now you can proceed to the procedure of jailbreaking or unlocking.
Again:
Jail is not bound: the iPhone 3G, iPhone 3GS old bottles, iPod touch 2G are not MC model.
Detailed instructions on how to jailbreak and unlock using the files of the assembly:
RedSn0w:
In continuation of glee, after some hours, as promised earlier, goes RedsN0w 0.9.6 beta 5, a utility for jailbreaking iPhone 3G \ GS under Windows and Mac OS, which will make subsequent otvyazku of the operator. User prilagaetsya.Tekuschaya version unlock working for all iPhone 3G. iPhone 3GS only compatible with the new bootrom and iOS 4.1 (old Butrim with iOS 4.2 is not supported yet). To find out what version of bootrom you, use this instruction.
IPhone users in April, 3GS (with a new bootrom), iPod touch 4G/3G/2G and iPad can use these instructions ONLY jailbreak, but in this case, every time you shutdown or restart devaysa they will have to turn it into a "jailbreak" with using the "Just boot tethered left now" in the utility RedSn0w.
DevTeam, as always, said that all actions to jailbreak and unlock you're doing at your own risk, for the software, no responsibility can not be held, it is provided "as is". But if you do these actions are not the first time, then you're probably already familiar with this warning.
Version of your modem devaysa need to upgrade to "06.15" and return to the old version would no longer be possible, ie you can not hide from the Apple service left their actions and you will most likely be denied a warranty if you need it! So, after rising to 06.15, possible disruptions to GPS, to fix the problem will be a separate hack, which is already being worked on. For this reason, it is recommended to jailbreak and unlock in case you get stuck on 5.14 or 5.15 and you have a dead brick, which must be unlocked.
Over time, may go different security fixes, which may require downgrade the modem, in connection with the fact that you raise it to 06.15, to install them you can not. If you unlocker, you already know this. With iOS 4.2.1 and modem 06.15, you will not be able to return to an older firmware version, you can use only the Custom firmware versions. Again, if you unlocker, you already are doing this. In any case, always write your ICCID, which is located in "settings-key-on device."
download from the link above. To do this, click on the icon of the iPhone in the left side. Then we press and hold the ALT key on your keyboard and click "Restore" in iTunes.
* The program asks you to specify the location of the firmware file. Specifies the location of ipsw firmware file iOS 4.2.1, which you downloaded above.
* Wait until iTunes puts on your phone firmware.
* When iTunes is finished all of their procedures and firmware will be completely installed, start the program RedSn0w and clicking "Browse".
* Select the file from the original iOS 4.2.1, which you downloaded from the link above and click "OK."
* Push the button "Next", which has now become active.
* Waits for the process.
* Select "Install Cydia" and "Install iPad baseband". "Install iPad baseband" choose only if you want to unlock your phone. If you want to make a regular jailbreak, then mark this checkbox is not necessary, the following two paragraphs of the instructions in this case, skipping.
* When selecting "Install iPad baseband", the program will remind us that the transition to version baseband 06.15, way back there will be no, because if you need to contact the service, to hide unlock downgrade did not happen.
* If you are unsure of your actions, click "Yes".
* Now, the program asks us to make sure that the phone is connected to the computer is turned off. If it is not turned off, it first must be connected to a computer and only pinch the button "Power" and wait for the unit is turned off, thus confirming the slide off by an inscription confirming shutdown is not necessary.
* Click "Next" only if the device is connected to the computer and off. DevTeam warning: During the period of updating the USB cable in any case did not pull out and watch, as for charging the phone, and for charging the computer (if it is powered by batteries). If in the course of further action to disable the USB or discharged phone, you get a totally non-functional brick, probably beyond repair. Before clicking the "Next", read the following two paragraphs to the instruction of three steps, as do need to be fast.
* After the press "Next", the program will proceed to the next step.
* Next, the phone needs to be translated mode DFU. On-screen instructions will appear in three steps:
1.Uderzhivaem button "Power" (top left) for 2 sec.
2.Do not releasing the "Power", click the button "Home" (bottom middle) for another 10 seconds.
3.Uderzhivaya click "Home", release the button "Power" and hold 15 seconds.
4.Kak only the screen goes gray, the button can be released.
* Now the program has begun to Jailbreak-y iOS 4.2.1. It will automatically restart the device, after which it will already Jailbreak 4.2.1 with baseband 06.15.
* Once the jailbreak procedure is complete, you can start the procedure otvyazki from the operator using Ultrasn0w 1.2 from Cydia (repository http://repo666.ultrasn0w.com/). To do this, perform the following steps:
1. Click on Cydia Installer from SpringBoard
2. Choose "Manage" tab at the bottom of the screen
3. Push the button "Sources"
* Now click on "Edit", then "Add". You will be prompted to enter the address of the source. Introduce http://repo666.ultrasn0w.com and click "Add Source", to add this repository.
* Once the source is added, press the big button "Return to Cydia", then click "Done", in the upper left corner of the screen.
* Now, select "repo666.ultrasn0w.com" from the "Source List" and finally select "ultrasn0w" from the package list (shown below) and install the application.
Step 3:
Reboot your iPhone and get fully unlock the device and enjoy!
Pwnage Tool:
Rejoice owners iKirpichey! The long-awaited Unlock (or otvyazka from the operator) iOS 4.2.1, which we wrote yesterday, the iPhone 3G \ GS is ready and you can enjoy them fully! Instructions included.
Alas, for the 4 th iPhone Unlock not ready yet and will be developed only as of today. DevTeam, as always, said that all actions to jailbreak and unlock you're doing at your own risk, for the software, no responsibility can not be held, it is provided "as is". But if you do these actions are not the first time, then you're probably already familiar with this warning.
Version of your modem devaysa need to upgrade to "06.15" and return to the old version would no longer be possible, ie you can not hide from the Apple service left their actions and you will most likely be denied a warranty if you need it! So, after rising to 06.15, possible disruptions to GPS, to fix the problem will be a separate hack, which is already being worked on. For this reason, it is recommended to jailbreak and unlock in case you get stuck on 5.14 or 5.15 and you have a dead brick, which must be unlocked.
Over time, may go different security fixes, which may require downgrade the modem, in connection with the fact that you raise it to 06.15, to install them you can not. Of course, if you unlocker, you already know this. With iOS 4.2.1 and modem 06.15, you will not be able to return to an older firmware version, you can use only the Custom firmware versions. Again, if you unlocker, you already are doing this. In any case, always write your ICCID, which is located in "settings-key-on device."
The current version of the unlock work for all iPhone 3G. iPhone 3GS only compatible with the new bootrom and iOS 4.1 (old Butrim with iOS 4.2 is not supported yet). To find out what version of bootrom you, use this instruction.
The new version of the utility supports Ultrasn0w unlock the following versions of the modem:
If you are the owner of this version of the modem you already have Cydia, you can put Ultrasn0w. After installing restart is required, then you can enjoy a fully working GSM module.
To unlock you need:
* IOS 3.2.2 for iPad (yes, yes it is, is fraught with the necessary vulnerability), which will require utility PwnageTool (official link, and if removed, the mirror);
* The program asks whether you want to update the modem to version 6.15, press the "Yes".
* Select the firmware file from the iPad.
* Click the blue arrow to continue.
* The program prompts you where to save your custom firmware.
* Then, when the program asks, do you jailbreak earlier, answer "No"
* Now, translate the iPhone in DFU mode as follows:
1. Press and hold the power button and the round "Home" button on the phone, 10 seconds;
2. Then, hold the power button, but "Home" deduct another 10 seconds;
3. Phone goes into DFU.
* Now open iTunes and restore the iPhone on the custom firmware, we just improvise with PwnageTool. To do this, click on the icon of the iPhone in the left side. Then we press and hold the ALT key on your keyboard and click "Restore" in iTunes
* The program asks you to specify the location of the firmware file. Specifies the location of Custom, we've created with PwnageTool.
* Wait until iTunes puts on your phone firmware to jailbreak.
Step 2:
* Once the jailbreak procedure is complete, you can start the procedure otvyazki from the operator using Ultrasn0w 1.2 from Cydia (repository http://repo666.ultrasn0w.com/). To do this, perform the following steps:
1. Click on Cydia Installer from SpringBoard;
2. Choose "Manage" tab at the bottom of the screen;
3. Push the button "Sources".
* Now click on "Edit", then "Add". You will be prompted to enter the address of the source. Introduce http://repo666.ultrasn0w.com and click "Add Source", to add this repository.
* Once the source is added, press the big button "Return to Cydia", then click "Done", in the upper left corner of the screen.
* Now, select "repo666.ultrasn0w.com" from the "Source List" and finally select "ultrasn0w" from the package list (shown below) and install the application.
Step 3:
Reboot your iPhone and get fully unlock the device and enjoy!
The information:
Remember! All the actions you do at your own risk! In no case does not disconnect the USB and do not let the run down the phone and computer during the procedure. Others read the warning in the instructions.
iPhone 3GS - very carefully read the instructions, because you must update the Bundle file using Pwnage Tool.
In all cases, it is recommended to keep SHSH certificates to be able to do in the future unbound Jail.
Year: 2010
Developer: DevTeam
System Requirements: Windows or Mac OS iTunes 10.1
ailbreak + Unlock iOS 4.2.1 Pwnage Tool + RedSn0wJailbreak + Unlock iOS 4.2.1 Pwnage Tool + RedSn0w | 3.04 GBThis assembly allows us to use all known at the time of distribution methods and unlock:1. With RedSn0w 0.9.6 beta 5;2. C using Pwn ...
This site does not store Software Related Jailbreak + Unlock iOS 4.2.1 Pwnage Tool + RedSn0w on its server. We only index and link to Software Related Jailbreak + Unlock iOS 4.2.1 Pwnage Tool + RedSn0w provided by other sites. Please contact the content providers to delete Software Related Jailbreak + Unlock iOS 4.2.1 Pwnage Tool + RedSn0w if any and email us, we'll remove relevant links or contents immediately.