Book123

    Free register and download UseNet downloader, then you can FREE Download from UseNet.

    Download without Limit " Free PDF: Harley Davidson Ultra Fairing Installation on a 2003 RoadStar " from UseNet for FREE!

Harley Davidson Ultra Fairing Install on a 2003 RoadStar by Bennie Scarbrough & 8230; will look like when it& 8217;s sitting on the forks & 8230; how much you will need to trim off of the lower & 8230; This is just the way that I did it. I& 8217;m sure there are things that I have forgotten or overlooked, so I& 8217;ll apologize up front for that. This is not a mod that you should be in a hurry with. You will be doing a lot of trimming on the inner fairing and it& 8217;s better to go slowly and trim a little at a time than to cut too much and not be able to fix & 8230;

Parts Needed: -1996 or later HD inner and outer fairing -Non-Silverado Yamaha windshield brackets (the front mounting tab needs to be straight not bent like the Silverado) -Inner mounting brackets (I used a set made by A69Cougar on the RSR Forum) -Radio mounting kit (AutoZone Model AW-509FD) (You can use a piece of extra plastic to make a hole cover for the indicator lamp above the radio) -16 gauge steel plate for making radio mounting plate (Home Depot 6& 8243;x18& 8243;) -12 volt relay (Auto Zone) -AM/FM CD player with iPod input on front (Marine version preferred) (eBay) -4& 8243; Marine grade speakers (2) I used Polk Audio (eBay) -5 ¼& 8221; Marine Grade Speakers (2) I used Polk Audio (eBay) -Radio antenna (I used a tune Trapper from www.ecshylites.citymax.com/page/page/761353.htm ) -1/4 yard of black speaker cloth (Fabric Store) -Speaker wire -16 gauge wire (red & 038; black for running poser to the relay) -Crimp terminals for the relay and speakers (spade type and size depends on what speakers you buy) -2& 8243; HD Fairing hole plugs (4) if you don& 8217;t plan on putting in gauges -Windshield (I bought mine at www.customflhtwindshields.net along with their Sport Shields with thumb -screws) -1& 8243; stand offs for outer fairing (HD dealer) -Chrome windshield trim w/mounting screws (HD Dealer) This is optional, but you will need windshield screws if you don& 8217;t buy the kit. You can get those at the dealer also. -Inner fairing mounting screws (4) 2 for mounting the internal bracket and 2 for attaching the inner fairing to the outer fairing (HD Dealer) -Something to hide the wires since you won& 8217;t have the headlight bucket under the fairing. I used a piece of a cordura bank bag that I cut out and wrapped it around the wires and the headlight bucket mount. I used a couple of Velcro strips to hold it in place. -Piece of 1& 8243; aluminum or steel flat bar to make the radio support (18& 8243; will be enough) -1 small box of Marine Tex -1 Spray Can of flat black paint (I used high temp since I already had a can of it) -4 Stainless Steel 2& 8243; long Phillips/slotted button head bolts with nylock nuts ( 8) -4 black plastic screw cap covers to fit the bolts -4 nylock nuts to fit windshield bracket bolts

Buy It at Lowest Price on Amazon

Harley Davidson Ultra Fairing Installation on a 2003 RoadStar.Pdf

Rating:
2.5 out of 5 by Book123