Book123

    Free register and download UseNet downloader, then you can FREE Download from UseNet.

    Download without Limit " Free PDF: Configuring the Cisco Wireless Controller Network Module on a Cisco Router " from UseNet for FREE!

& 8230; rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms Router For information about configuring VLANs on the Cisco WLCM, see the Cisco Wireless LAN Solution Product Guide at & 8230; Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA© 2007 Cisco Systems, Inc. All rights reserved. Configuring the Cisco Wireless Controller Network Module on a Cisco Router, Cisco IOS Release 12.4(15)T The Cisco wireless LAN (WLAN) controller network module (WLCM) is designed to provide small- and medium & 8230;

Prerequisites for Configuring the Cisco WLCM on a Cisco Router The Cisco WLCM operating system on the Cisco WLCM must be compatible with the Cisco IOS software release and feature set on the router. Use the following commands to view the Cisco IOS version on the router and to view the operating system version on the WLCM.  To view the Cisco IOS software release and feature set, enter the show version command in privileged EXEC mode on the router.  To view the Cisco WLCM OS version, enter the show sysinfo: command at the WLCM prompt. Restrictions for Configuring the Cisco WLCM on a Cisco Router The WLCM does not manage the integrated access points (HWIC-AP modules) on Cisco ISRs& 8230; Configuring the Cisco Wireless Controller Network Module on a Cisco Router, Cisco IOS Release 12.4(15)T Information About the Cisco WLCM on a Cisco Router 4 Cisco IOS Release 12.4(15)T OL-12630-01 Figure2 Cisco WLCM Deployment for Converged Wireless with Secure Data, Voice, Switching, and Wireless Functions The Cisco Wireless Control System (WCS) allows users to design, control, and monitor enterprise wireless networks from a centralized location. The Cisco WCS is an optional network component that works in conjunction with Cisco APs and Cisco WLCMs. The Cisco 2700 series location appliance is another optional network component that enhances the high-accuracy, built-in, Cisco WCS location-tracking abilities by computing, collecting, and storing historical location data. This data can be displayed in the Cisco WCS. The location appliance acts as a server to one or more Cisco WCS servers; the location appliance collects, stores, and passes on data from its associated controllers. For complete information about managing the Cisco WLAN location appliance, see the following URL: http://www.cisco.com/en/US/products/ps6386/tsd_products_support_series_home.html Power over Ethernet Power over Ethernet (PoE) is supported on Cisco ISR routers. When using PoE, the installer runs a single CAT-5 cable from each access point to PoE-equipped network elements, such as a PoE-compliant Cisco EtherSwitch service module on the integrated services router or a Cisco Catalyst 3750 switch with PoE. When the PoE equipment determines that the access point is PoE-enabled, it sends -48 VDC over the unused pairs in the Ethernet cable to power the access point. Connecting Access Points Access points can be connected to a separate switch or to a Cisco EtherSwitch service module on CiscoISRs. The Cisco ISR family supports a range of integrated Cisco EtherSwitch service modules with 4 to 48 ports supporting PoE. Note Only Cisco EtherSwitch service modules support PoE. Cisco Ethernet switch network modules (NM-16ESW and NMD-36ESW) do not support PoE.

Buy It at Lowest Price on Amazon

Configuring the Cisco Wireless Controller Network Module on a Cisco Router.Pdf

Rating:
2.5 out of 5 by Book123