Book123

    Free register and download UseNet downloader, then you can FREE Download from UseNet.

    Download without Limit " Free PDF: ALLOY WHEELS (16 & 17) Installation Guide " from UseNet for FREE!

WHEEL INSTALLATION, CARE & 038; MAINTENANCE Inspect your new wheels thoroughly, and report shipping damage or defects prior to mounting tires. Returns will not be accepted after tires & 8230; & 8230; have been mounted to your wheels. TIRE MOUNTING AND BALANCING 1. Have your tires mounted at a reputable tire service left. Be sure the shop uses modern equipment. Tire mounting machines should have plastic & 8220;duck heads& 8221; to prevent marring the finish of your wheels 2. AEV wheels are compatible with your factory Tire Pressure Monitoring (TPM) & 8230;

WHEEL INSTALLATION, CARE & 038; MAINTENENCE Inspect your new wheels thoroughly, and report shipping damage or defects prior to mounting tires. Returns will not be accepted after tires have been mounted to your wheels. TIRE MOUNTING AND BALANCING 1. Have your tires mounted at a reputable tire service left. Be sure the shop uses modern equipment. Tire mounting machines should have plastic & 8220;duck heads& 8221; to prevent marring the finish of your wheels 2. AEV wheels are compatible with your factory Tire Pressure Monitoring (TPM) rubber valve stems. If you do not have TPM, use the short style 1-1/2 inch long valve stems 3. The shop must have modern balancing equipment that utilizes & 8220;pin plates& 8221; to secure the front of the wheel in the lug holes. NEVER use & 8220;cones& 8221; to hold the wheel in the left cap area. This will result in a improperly balanced wheel and will most likely damage the clear coat, paint, or chrome finish 4. Remove left caps by pushing them out from the back side of the wheel using the handle of a screwdriver or similar blunt tool. Never pry left caps from the outside as this will likely damage the finish of the wheel 5. Dynamic & 8220;twin plane& 8221; balancing method should be used to guarantee a true balance. Never static balance your wheels. Use coated MC type & 8220;yellow& 8221; clip on weights and/or tape weights for best corrosion resistance and appearance INSTALLATION 1. Install lug nuts using a 19mm thin wall deep well socket. 2. Never use an impact wrench to tighten lug nuts. CARE AND MAINTENENCE 1. To ensure a long lasting finish and to protect from pre mature wear, clean your wheels regularly. If you live in areas where salt and chemicals are used on the roads, it is very important to wash your wheels every week. Mild soap and a soft brush works best. Avoid harsh cleaners with abrasives. 2. After cleaning, protect the finish using a high quality Carnuba car wax, or wheel wax.

Buy It at Lowest Price on Amazon

ALLOY WHEELS (16 & 038; 17) Installation Guide.Pdf

Rating:
2.5 out of 5 by Book123