Book123

    Free register and download UseNet downloader, then you can FREE Download from UseNet.

    Download without Limit " Science/Engineering Corrosion of Aluminium " from UseNet for FREE!

More

Christian Vargel, ?Corrosion of Aluminium?



Buy Book at Lowest Price on Amazon

DOWNLOAD FROM:

Thanx to xgirl!

& 8220;

Book Description:

This book highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium - an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc.

Collection name: Materials & Mechanical

Table of Contents

* Frontmatter

o Half Title Page

o Copyright

o Title Page

o Copyright

o Dedication Page

o Foreword

o Foreword to the Original French Edition

o Introductory Remark

o Preface to the Original French Edition

o Acknowledgements

o Contents

* Part A: Aluminium and Its Alloys

o Chapter A.1. The Advantages of Aluminium

+ 1.1. LIGHTNESS

+ 1.2. THERMAL CONDUCTIVITY

+ 1.3. ELECTRICAL CONDUCTIVITY

+ 1.4. RESISTANCE TO CORROSION

+ 1.5. SUITABILITY FOR SURFACE TREATMENTS

+ 1.6. THE DIVERSITY OF ALUMINIUM ALLOYS

+ 1.7. THE DIVERSITY OF SEMI-PRODUCTS

+ 1.8. THE FUNCTIONALITY OF CASTINGS AND EXTRUSIONS

+ 1.9. THE EASE OF USE

+ 1.10. RECYCLING

+ REFERENCES

o Chapter A.2. Physical Properties of Aluminium

o Chapter A.3. The Metallurgy of Aluminium

+ 3.1. ALLOY SERIES

+ 3.2. CASTING ALLOYS

+ 3.3. WROUGHT ALLOYS

+ REFERENCE

o Chapter A.4. The Most Common Wrought Aluminium Alloys

+ 4.1. THE 1000 SERIES

+ 4.2. THE 3000 SERIES

+ 4.3. THE 5000 SERIES

+ 4.4. THE 8000 SERIES

+ 4.5. THE 2000 SERIES

+ 4.6. THE 6000 SERIES

+ 4.7. THE 7000 SERIES

+ REFERENCES

o Chapter A.5. Selection Criteria for Aluminium Alloys

+ 5.1. SELECTION CRITERIA

+ 5.2. SELECTING AN ALLOY

+ 5.3. PRINCIPAL APPLICATIONS OF ALUMINIUM AND ITS ALLOYS

* Part B: The Corrosion of Aluminium

o Chapter B.1. The Corrosion of Aluminium

+ 1.1. SHORT HISTORICAL INTRODUCTION

+ 1.2. THE ELECTROCHEMICAL BASIS OF METAL CORROSION

+ 1.3. THE ELECTROCHEMICAL REACTIONS IN THE CORROSION OF ALUMINIUM

+ 1.4. THE STANDARD POTENTIAL OF A METAL

+ 1.5. DISSOLUTION POTENTIALS

+ 1.6. ELECTROCHEMICAL EQUILIBRIUM (POURBAIX) DIAGRAMS

+ 1.7. THE ELECTROCHEMICAL BEHAVIOUR OF ALUMINIUM

+ 1.8. ALUMINIUM AS A PASSIVE METAL

+ REFERENCES

o Chapter B.2. Types of Corrosion on Aluminium

+ 2.1. UNIFORM CORROSION

+ 2.2. PITTING CORROSION

+ 2.3. TRANSGRANULAR AND INTERGRANULAR (INTERCRYSTALLINE) CORROSION

+ 2.4. EXFOLIATION CORROSION

+ 2.5. STRESS CORROSION

+ 2.6. FILIFORM CORROSION

+ 2.7. WATER LINE CORROSION

+ 2.8. CREVICE CORROSION

+ 2.9. CAVITATION

+ 2.10. EROSION

+ 2.11. MICROBIOLOGICAL CORROSION

+ 2.12. CORROSION PRODUCTS

+ REFERENCES

o Chapter B.3. Galvanic Corrosion

+ 3.1. ALUMINIUM AND GALVANIC CORROSION

+ 3.2. DEFINITION OF GALVANIC CORROSION

+ 3.3. FORM OF GALVANIC CORROSION

+ 3.4. PRINCIPLE OF A BATTERY

+ 3.5. CONDITIONS OF GALVANIC CORROSION

+ 3.6. GALVANIC CORROSION PARAMETERS

+ 3.7. PRACTICAL ASPECTS OF GALVANIC CORROSION

+ 3.8. THE INFLUENCE OF THE TYPE OF METAL IN CONTACT WITH ALUMINIUM IN EMERGED ASSEMBLIES

+ 3.9. CONTACT BETWEEN ALUMINIUM ALLOYS

+ 3.10. PREDICTING GALVANIC CORROSION

+ 3.11. PREVENTION OF GALVANIC CORROSION

+ REFERENCES

o Chapter B.4. Testing Methods

+ 4.1. TYPES OF TESTS

+ 4.2. GOAL OF CORROSION TESTING METHODS

+ 4.3. EXPRESSION OF RESULTS

+ 4.4. STANDARDISATION OF CORROSION TESTING METHODS

+ 4.5. ELECTROCHEMICAL TEST METHODS

+ REFERENCES

o Chapter B.5. Protection Against Corrosion

+ 5.1. BOEHMITE COATINGS

+ 5.2. CHEMICAL CONVERSION TREATMENTS

+ 5.3. ANODISING

+ 5.4. PAINT AND OTHER ORGANIC COATINGS

+ 5.5. CATHODIC PROTECTION

+ 5.6. CLADDING

+ 5.7. ZINC COATING

+ 5.8. INHIBITORS

+ REFERENCES

o Chapter B.6. The Corrosion Behaviour of Aluminium Alloys

+ 6.1. FACTORS RELATED TO THE ENVIRONMENT

+ 6.2. FACTORS RELATED TO THE METAL

+ 6.3. FACTORS RELATED TO CONDITIONS OF USE

+ 6.4. THE CORROSION RESISTANCE OF ALUMINIUM ALLOYS

+ REFERENCES

* Part C: Atmospheric Corrosion of Aluminium

o Chapter C.1. Atmospheric Corrosion

+ 1.1. THE NATURE OF ATMOSPHERIC CORROSION

+ REFERENCES

o Chapter C.2. The Parameters of Atmospheric Corrosion

+ 2.1. RELATIVE HUMIDITY

+ 2.2. RAIN

+ 2.3. FOG

+ 2.4. CONDENSATION

+ 2.5. TEMPERATURE

+ 2.6. GASEOUS POLLUTANTS

+ 2.7. DUST

+ 2.8. ALTERNATING PERIODS OF DAMPNESS AND DRYNESS

+ REFERENCES

o Chapter C.3. Types of Atmospheres

+ 3.1. THE CLASSIC TYPOLOGY

+ 3.2. STANDARDISED TYPOLOGY

+ 3.3. THE PREDICTIVE APPROACH

+ REFERENCES

o Chapter C.4. The Various Forms of Atmospheric Corrosion

+ 4.1. PITTING CORROSION

+ 4.2. GALVANIC CORROSION

+ 4.3. FILIFORM CORROSION

+ 4.4. TARNISHING DUE TO WATER STAINING

+ 4.5. WATER STAINING DUE TO STORAGE OF SEMI-PRODUCTS

+ REFERENCES

o Chapter C.5. The Resistance of Aluminium to Atmospheric Corrosion

+ 5.1. THE DOME OF SAN GIOACCHINO CHURCH, A 100-YEAR-OLD EXPERIENCE

+ 5.2. ATMOSPHERIC CORROSION OF ALUMINIUM OVER TIME

+ 5.3. WEATHERING RESISTANCE OF WROUGHT ALLOYS

+ 5.4. WEATHERING OF CASTING ALLOYS

+ 5.5. WEATHERING RESISTANCE OF ANODISED SEMI-PRODUCTS

+ REFERENCES

* Part D: Corrosion in Water

o Chapter D.1. Freshwater

+ 1.1. THE PHYSICAL CHEMISTRY OF WATER

+ 1.2. THE ANALYSIS OF WATER

+ 1.3. TYPOLOGY OF WATERS

+ 1.4. THE VARIOUS FORMS OF ALUMINIUM CORROSION IN NATURAL WATERS

+ 1.5. BLACKENING OF ALUMINIUM

+ 1.6. THE ACTION OF WATER ON ALUMINIUM

+ 1.7. THE INFLUENCE OF TEMPERATURE

+ 1.8. THE INFLUENCE OF OXYGEN DISSOLVED IN WATER

+ 1.9. THE INFLUENCE OF pH

+ 1.10. THE INFLUENCE OF WATER MOVEMENT AND FLOW SPEED

+ 1.11. PREDICTING THE RESISTANCE OF ALUMINIUM IN FRESHWATER

+ 1.12. EXAMPLES FOR THE USE OF ALUMINIUM IN CONTACT WITH FRESHWATER

+ 1.13. DISTILLED WATER

+ REFERENCES

o Chapter D.2. Brackish Waters and Wastewater

+ 2.1. BRACKISH WATERS

+ 2.2. WASTEWATER

+ REFERENCES

o Chapter D.3. Seawater

+ 3.1. CHARACTERISTICS OF SEAWATER

+ 3.2. MARINE ENVIRONMENTS

+ 3.3. FORMS OF CORROSION IN SEAWATER

+ 3.4. MARINE APPLICATIONS OF ALUMINIUM

+ REFERENCES

* Part E: The Action of Inorganic Products

o Chapter E.1. Oxides and Peroxides

+ 1.1. OXYGEN

+ 1.2. OZONE

+ 1.3. METAL OXIDES

+ 1.4. OXIDES OF COPPER CuO, Cu2O, SILVER Ag2O, MERCURY HgO AND LEAD PbO, Pb2O

+ 1.5. CARBON MONOXIDE CO AND CARBON DIOXIDE CO2

+ 1.6. SULPHUR DIOXIDE SO2

+ 1.7. SULPHURIC ANHYDRIDE SO3

+ 1.8. NITROGEN OXIDES NO2, N2O4

+ 1.9. PEROXIDES

+ 1.10. OXYCHLORIDES

+ REFERENCES

o Chapter E.2. Hydrogen, Nitrogen, and Noble Gases

+ 2.1. HYDROGEN H2

+ 2.2. NITROGEN

+ 2.3. NOBLE GASES: ARGON Ar, HELIUM He, KRYPTON Kr, NEON Ne, AND XENON Xe

+ REFERENCE

o Chapter E.3. Metalloids and Halides

+ 3.1. PHOSPHORUS P, ARSENIC As, AND ANTIMONY Sb

+ 3.2. CARBON C, SILICON Si, AND BORON B

+ 3.3. SULPHUR S

+ 3.4. HALOGENS

+ 3.5. HALOGEN DERIVATIVES

+ 3.6. SULPHIDES

+ REFERENCES

o Chapter E.4. Inorganic Bases

+ 4.1. SODIUM HYDROXIDE NaOH

+ 4.2. POTASSIUM HYDROXIDE KOH

+ 4.3. LITHIUM HYDROXIDE LiOH

+ 4.4. CALCIUM HYDROXIDE Ca(OH)2

+ 4.5. BARIUM HYDROXIDE Ba(OH)2 8H2O

+ 4.6. AMMONIA NH3

+ 4.7. AMMONIA WATER NH4OH

+ 4.8. HYDRAZINE N2H4

+ 4.9. UREA NH2CONH2

+ REFERENCES

o Chapter E.5. Inorganic Acids

+ 5.1. HYDRACIDS

+ 5.2. OXACIDS

+ REFERENCES

o Chapter E.6. Inorganic Salts

+ 6.1. FLUORIDES

+ 6.2. CHLORIDES

+ 6.3. CHLORATES AND PERCHLORATES

+ 6.4. HYPOCHLORITES

+ 6.5. BROMIDES AND IODIDES

+ 6.6. SULPHATES

+ 6.7. SULPHITES AND HYDROGEN SULPHITES

+ 6.8. SODIUM THIOSULPHATE Na2S2O3 5H2O

+ 6.9. SULPHIDES

+ 6.10. PERSULPHATES

+ 6.11. NITRATES

+ 6.12. NITRITES

+ 6.13. PHOSPHATES

+ 6.14. ARSENATES AND ARSENITES

+ 6.15. CARBONATES

+ 6.16. SILICATES AND METASILICATES

+ 6.17. BORATES, PERBORATES AND TETRABORATES

+ 6.18. CYANIDES, CYANATES AND THIOCYANATES

+ 6.19. CHROMATES AND DICHROMATES

+ 6.20. PERMANGANATES

+ 6.21. CARBAMATES AND SULPHAMATES

+ REFERENCES

* Part F: The Action of Organic Products

o Chapter F.1. Hydrocarbons

+ 1.1. ALKANES

+ 1.2. ALKENES

+ 1.3. ALKYNES

+ 1.4. ARENES OR AROMATIC HYDROCARBONS

+ 1.5. TERPHENYLS

+ 1.6. CYCLIC, NON-BENZENIC HYDROCARBONS

+ 1.7. FUEL FOR ENGINES

+ 1.8. PETROLEUM INDUSTRY

+ 1.9. DRILLING SLUDGE

+ REFERENCES

o Chapter F.2. Halogen Derivatives

+ 2.1. DERIVATIVES OF ACYCLIC HYDROCARBONS

+ 2.2. DERIVATIVES OF AROMATIC HYDROCARBONS

+ 2.3. HALOGEN DERIVATIVES OF ACIDS AND PHENOLS

+ REFERENCES

o Chapter F.3. Alcohols, Ethers, Thiols and Phenols

+ 3.1. THE ACTION OF BOILING ALCOHOLS AND DEHYDRATED PHENOLS ON ALUMINIUM

+ 3.2. ACYCLIC SATURATED ALCOHOLS

+ 3.3. ACYCLIC UNSATURATED ALCOHOLS

+ 3.4. AROMATIC ALCOHOLS

+ 3.5. OTHER ALCOHOLS

+ 3.6. POLYALCOHOLS

+ 3.7. ETHERS

+ 3.8. THIOLS AND THEIR DERIVATIVES

+ 3.9. PHENOLS

+ REFERENCES

o Chapter F.4. Amines

+ 4.1. ACYCLIC AMINES

+ 4.2. ALCOHOL AMINES

+ 4.3. AROMATIC AMINES

+ 4.4. DERIVATIVES OF AROMATIC AMINES

+ 4.5. AMINOPHENOLS

+ REFERENCES

o Chapter F.5. Aldehydes and Ketones

+ 5.1. ALIPHATIC ALDEHYDES

+ 5.2. CYCLIC ALDEHYDES

+ 5.3. AROMATIC ALDEHYDES

+ 5.4. KETONES

+ REFERENCES

o Chapter F.6. Carboxylic Acids and their Derivatives

+ 6.1. ACYCLIC HYDROCARBON ACIDS

+ 6.2. ACID ANHYDRIDES

+ 6.3. SALTS OF ORGANIC ACIDS

+ 6.4. ESTERS

+ 6.5. AMIDES

+ 6.6. NITRILES AND NITROUS DERIVATIVES

+ REFERENCES

o Chapter F.7. Other Organic Products

+ 7.1. ALKALOIDS AND HETEROCYCLIC COMPOUNDS

+ 7.2. GLUCIDES

+ REFERENCE

* Part G: The Effect of Other Environments

o Chapter G.1 Corrosion in Soil

+ 1.1. TYPES OF SOIL

+ 1.2. THE INFLUENCE OF THE NATURE OF SOIL ON THE CORROSION BEHAVIOUR OF ALUMINIUM

+ 1.3. FORM OF ALUMINIUM CORROSION IN SOILS

+ 1.4. ALUMINIUM CORROSION RESISTANCE IN SOILS

+ 1.5. PROTECTION AGAINST CORROSION IN SOIL

+ REFERENCES

o Chapter G.2. The Effect of Stray Currents and Alternating Current

+ 2.1. STRAY CURRENTS

+ 2.2. ALTERNATING CURRENTS

+ REFERENCES

o Chapter G.3. Fertilisers and Herbicides

+ 3.1. FERTILISERS

+ 3.2. PLANT-CARE PRODUCTS

+ REFERENCES

o Chapter G.4. Construction Materials

+ 4.1. THE EFFECT OF CONCRETE

+ 4.2. THE EFFECT OF PLASTER

+ 4.3. THE EFFECT OF WOOD

+ 4.4. THE EFFECT OF POLYMERS

+ REFERENCES

o Chapter G.5. Food Industry

+ 5.1. ALUMINIUM AND HEALTH

+ 5.2. FOOD COMPATIBILITY OF ALUMINIUM: EUROPEAN STANDARDISATION

+ 5.3. APPLICATIONS OF ALUMINIUM IN CONTACT WITH FOODSTUFFS

+ 5.4. THE RESISTANCE OF ALUMINIUM IN CONTACT WITH FOODSTUFFS

+ REFERENCES

o Chapter G.6. Cleaning of Aluminium

+ 6.1. CLEANING OF METALLIC SURFACES

+ 6.2. THE CHOICE OF CLEANING PRODUCTS

+ 6.3. COMPATIBILITY WITH ALUMINIUM

+ 6.4. CLEANING MATERIALS USED WITH FOOD

+ 6.5. CLEANING ANODISED SURFACES

+ 6.6. SAND BLASTING

+ 6.7. CLEANING BY PROJECTION OF ICE OR CARBONIC ICE

+ REFERENCES

o Chapter G.7. Behaviour in Fire

+ 7.1. FIRE RESISTANCE

+ 7.2. REACTION TO FIRE

+ 7.3. THE CLASSIFICATION OF ALUMINIUM ALLOYS

+ REFERENCES

* Products that may be Dangerous in Contact with Aluminium

* General References

* Glossary

* Index

& 8221;

Thanks! Thanks!

Man you are just great. Thank you so much. I needed this book so desperately and this was'nt available anywhere in my city.

Rating:
2.5 out of 5 by Book123